Stainless Steel 316L Ultra-High-Purity (VAR / VIM-VAR) Seamless Tubing Manufacturer & Supplier
SS 316L UHP is a controlled-chemistry 316L produced by Vacuum Arc Remelting (VAR) or VIM-VAR to minimise non-metallic inclusions, with sulphur controlled to 0.005-0.017% for consistent orbital weldability. Delivered electropolished (Ra 0.25 um / 10 Ra-in or better), helium leak-tested, nitrogen-purged, capped and double-bagged for cleanroom entry, it is the standard tubing for semiconductor gas and high-purity fluid systems. Stancor supplies UHP tubing through qualified electropolishing partners, with an in-house EP line on the investment roadmap.
UNS: S31603 | Category: Austenitic Stainless Steel - UHP Grade | Werkstoff Nr: 1.4404 / 1.4435 | EN Name: X2CrNiMo17-12-2 (controlled chemistry)
Size Range
Outer Diameter: 1/8" to 2" OD (3.18mm to 50.8mm OD)
Wall Thickness: 0.035" to 0.083" (0.89mm to 2.11mm)
Chemical Composition (%)
| C | Mn | Si | Cr | Ni | Mo | S | P | O | N |
|---|---|---|---|---|---|---|---|---|---|
| 0.030 max | 2.00 max | 0.75 max | 16.0-18.0 | 10.0-15.0 | 2.0-3.0 | 0.005-0.017 (controlled) | 0.030 max | 50 ppm max (VAR) | 0.10 max |
Mechanical Properties
- Tensile Strength
- 485 MPa min
- Yield Strength
- 170 MPa min
- Elongation
- 35% min
- Hardness
- 90 HRB max
Physical Properties
- Density
- 7.98 g/cm3
- Melting Range
- 1375-1400 C
- Thermal Conductivity
- 16.3 W/m-K
- Electrical Resistivity
- 740 nOhm-m
- Specific Heat
- 500 J/kg-K
- Coeff. of Thermal Expansion
- 15.9 um/m-C
Corrosion Resistance
- Pitting Resistance (PREN)
- ~24-26
- Max Service Temp (Oxidizing)
- 870 C
- Intergranular Corrosion
- Resistant (low carbon)
- Stress Corrosion Cracking
- Better than 304L in chlorides
- General Corrosion Rate
- <0.05 mm/yr; Cr/Fe-enriched passive layer after electropolishing
- Seawater Resistance
- Moderate
Applicable Standards
- SEMI F20 (UHP tubing chemistry & cleanliness)
- SEMI F19 (surface finish Ra)
- ASTM A269 / A270
- ASTM A632
- ASTM A213 / ASME SA213
Applications
- UHP specialty and bulk gas distribution (N2, Ar, He, H2, O2, SiH4, NF3)
- Gas cabinets, valve manifold boxes and gas sticks
- CMP slurry and DI water distribution
- Sub-fab process cooling water (PCW) loops
- Orbital-welded cleanroom process piping
- Pharmaceutical WFI and biotech high-purity lines
Industries Served
- Semiconductor & Electronics
- Pharmaceutical
- Solar & Photovoltaic
- Display Manufacturing
- Biotechnology
Key Advantages
- VAR / VIM-VAR melting minimises inclusions that seed particle generation
- Controlled sulphur for repeatable orbital-weld penetration
- Electropolished Cr-rich passive layer for moisture dry-down and low outgassing
- Full SEMI F20-type documentation: heat chemistry, inclusion rating, surface Ra
- Cleanroom-compatible packaging: N2 purge, caps, double bag
- Fully traceable heat-to-tube certification (EN 10204 3.1)
Equivalent Grades
- ASTM
- TP316L (controlled S)
- SEMI
- F20 Type 1 / Type 2
- DIN
- 1.4404 / 1.4435
Frequently Asked Questions
What is the chemical composition of SS 316L UHP (VAR)?
SS 316L UHP (VAR) contains C 0.030 max, Mn 2.00 max, Si 0.75 max, Cr 16.0-18.0, Ni 10.0-15.0, Mo 2.0-3.0, S 0.005-0.017 (controlled), P 0.030 max, O 50 ppm max (VAR), N 0.10 max (weight %).
What are the mechanical properties of SS 316L UHP (VAR)?
Tensile Strength: 485 MPa min; Yield Strength: 170 MPa min; Elongation: 35% min; Hardness: 90 HRB max.
What are the equivalent grades of SS 316L UHP (VAR)?
Nearest equivalents of SS 316L UHP (VAR): TP316L (controlled S) (ASTM), F20 Type 1 / Type 2 (SEMI), 1.4404 / 1.4435 (DIN). Equivalents are close matches, not identical; confirm against the governing standard.
Which standards does Stancor Copper supply SS 316L UHP (VAR) to?
SS 316L UHP (VAR) is supplied to SEMI F20 (UHP tubing chemistry & cleanliness), SEMI F19 (surface finish Ra), ASTM A269 / A270, ASTM A632 and ASTM A213 / ASME SA213.
What sizes of SS 316L UHP (VAR) are available?
1/8" to 2" OD (3.18mm to 50.8mm OD).
What is SS 316L UHP (VAR) used for?
SS 316L UHP (VAR) is used for UHP specialty and bulk gas distribution (N2, Ar, He, H2, O2, SiH4, NF3), Gas cabinets, valve manifold boxes and gas sticks, CMP slurry and DI water distribution, Sub-fab process cooling water (PCW) loops, Orbital-welded cleanroom process piping and Pharmaceutical WFI and biotech high-purity lines.